Displaying An Analogue Video Signal; Activating And Deactivating Battery Saving Mode - Kathrein MSK 30 Gebrauchsanleitung

3. Press the navigation wheel to select the brightness value.
➯ The brightness value is active (marked in green).
4. Rotate the navigation wheel to change the brightness value.
5. Press the navigation wheel to save the selection.
➯ The brightness value is saved.
Tip
To select other menu items and values, take steps 1 – 3, see Changing brightness.
Tip
You can switch between the volume menu items by using the touch screen directly. The
value of the menu item is active by default:
► Press a volume menu item.
➯ The menu item value is active (marked in green).
4.3

Displaying an analogue video signal

1. Connect an analogue video signal using the cinch connector.
2. Take steps 1 – 3 to select
➯ The
VIDEO IN value is active (marked in green).
3. Rotate the navigation wheel and select
4.4

Activating and deactivating battery saving mode

In the battery saving mode, the display brightness is reduced after 30 seconds and the meter turns
off automatically after 5 or 10 minutes of inactivity.
1. Take steps 1 – 3 to select
➯ The battery saving value is active (marked in green).
2. Rotate the navigation wheel and select
➯ The battery saving mode is activated.
Rotate the navigation wheel and select
➯ The battery saving mode is deactivated.
VIDEO IN, see Changing brightness.
EXT to display an external analogue video signal.
BATTERY SAVING, see Changing brightness.
ON to activate the battery saving mode.
OFF to deactivate the battery saving mode.
9 of 28