Changing Measurement Settings; Touch Screen Display Area; Changing A Setting Value Using The Navigation Wheel - Kathrein MSK 30 Gebrauchsanleitung

Changing measurement settings

3 Changing measurement settings
3.1

Touch screen display area

1
5
4
Tip
Use the main menu on the touch screen or the buttons to call up the following functions:
●
SAT
●
TV
●
CATV
●
SPECT
●
PLAN
3.2

Changing a setting value using the navigation wheel

1. Press the navigation wheel to activate the line with setting parameters.
➯ A setting parameter is active (marked in green).
2. Rotate the navigation wheel to select a desired setting parameter.
3. Press the navigation wheel to go to a setting value.
➯ A setting value is active (marked in green).
4. Rotate the navigation wheel to change the setting value.
➯ The setting value changes.
5. Press the navigation wheel to confirm the selection.
➯ The new setting value is saved.
6 of 28
➀ Setting parameters and values
② Image display
③ Context sensitive menu
④ Transport stream information
⑤ Measurements
2
3