Measuring Sat, Tv And Catv Signals; General; Selecting A Signal Type - Kathrein MSK 30 Gebrauchsanleitung

Measuring SAT, TV and CATV signals

2. Rotate the navigation wheel to select
4. Press the navigation wheel to activate the data file value (LOG.1,
5. Rotate the navigation wheel to select a data file (LOG.1,
6. Press the navigation wheel to save the selection.
7. Rotate the navigation wheel to select RECALL.
9. Rotate the navigation wheel to switch between the saved measuring results.
7 Measuring SAT, TV and CATV signals
For more information about measurements, see the MSK 30 Quick Start Guide.
7.1

General

7.1.1

Selecting a signal type

1. Press ON/OFF HOME
➯ The main menu opens and the
2. Rotate the navigation wheel or use the touch screen to select SAT,
Tip
Use the main menu on the touch screen or buttons to select SAT,
16 of 28
RECALL
3. Press RECALL DATALOGGER.
➯ The
RECALL DATALOGGER
is active (marked in green).
8. Press RECALL to open the list with saved measuring results.
➯ The list with measuring results opens.
to open the main menu.
SAT menu item is active (the icon is larger).
DATALOGGER.
menu opens and
LOG.
LOG.2 etc.).
TV
DATA FILE menu item
2. etc.).
or CATV.
TV or CATV signals.