Tip
If the input signal is too high or too low, there is a notification POWER:
POWER: TOO
7.1.2
Zooming in on constellation display
1. Select a signal type, see Selecting a signal type.
2. Press
SAT/TV/CATV
3. Rotate the navigation wheel or use the touch screen to select ZOOM.
4. Select a quadrant of the constellation.
➯ The selected quadrant is zoomed in.
7.1.3
Activating and deactivating full-screen mode
For more information about the full-screen mode, see the MSK 30 Quick Start Guide.
LOW:
to go to the constellation.
TOO HIGH
or
17 of 28