Adjusting The Depth Arm Pad - Vermeiren V300 DL Gebrauchsanweisung

3.6.2 Adjusting the foot plates
The foot plates can be used in 2 positions. Standard they are adjusted with the base plate in
the back position.
The foot plates can be adjusted to the front by switching the left and right foot plate.
3.6.3 Adjusting angle foot plates
1
Adjust the angle of the foot plates as follow:
1.
2.
3.
3.7
Downloaded from www.Manualslib.com
2
3

Loosen bolt .
Adjust tube  in the desired angle. The angle indication (80°-85°-90°-95°-100°) is
according the dashes .

Retighten the bolt .

Adjusting the depth arm pad

manuals search engine
2
1
100°
80°
Adjust the depth of the arm pad as
follow (range 120 mm: step less):
1. Remove or loosen both screws
under the arm pad.
2. Move the arm pad to the front or
rear in the desired depth with the
grooves (42,5 mm) or mount the
arm pad in the other holes (3
positions steps from 42,5 mm).
3. Remount both screws.
Page 23
V300DL
2016-03
3