Machine Description; Machine Parts - Profitec Pro 500 Bedienungsanleitung

Use of the machine other than for the above mentioned purpose is strictly prohibited. The manufacturer
cannot be held responsible for damages due to unsuitable use of the machine and is not liable for recourse.
3

MACHINE DESCRIPTION

3.1 Machine parts

1
2
3
4
5
6
7
8
The PID control of your Pro500 allows you to regulate the steam temperature and thus the boiler pressure
for steaming milk. The steaming temperature is factory pre-set to 120°C (248°F). Inherent to the design of
the machine, when modifying the steaming temperature, not only the boiler pressure but also the extraction
temperature of the coffee changes.
Bedienungsanleitung / Instruction manual Profitec Pro 500
Downloaded from www.Manualslib.com
This appliance is intended to be used in household and similar applications such as:
•
staff kitchen areas in shops, offices and other working environments
•
farm houses
•
by clients in hotels, motels and other residential type environments
•
bed and breakfast type environments
Caution!
Danger of injury: The following parts are hot or may become hot:
• area around the steam handle and the hot water handle
• steam and hot water tube
• portafilter
• brew group
• body (upper part and side frames)
manuals search engine
1 Cup warming tray; fresh water tank
underneath
2 Steam dispenser
3 Brew group
4 Green control lamp
5 ON/OFF switch
6 Boiler pressure gauge
13
7 Orange control lamp
8 Portafilter spout
9 Drip tray; PID display behind (see image
12
below)
10 Portafilter
11
11 Pump pressure gauge
12 Brew group lever
13 Hot water dispenser
10
9
PID display behind the drip tray
18