Device Information (Info) - Cameo EVOS W3 Bedienungsanleitung

Main Menu
Auto Lock Automatically
Control
locks the
push-button
rotary encoder
Settings
Info

DEVICE INFORMATION (Info)

Service
Starting from the main display, press the push-button rotary encoder to navigate to the main menu. Turn the encoder to access the menu
Quick-Light
for the device settings Info and then press the encoder. To display the required information, rotate the encoder to select the corresponding
menu item and confirm by pressing the encoder.
Main Menu
Control
Settings
Info
Service
Quick-Light
Main Menu
Rotate the encoder to select, press to confirm, return with
Control

Firmware
Settings
Temperature
Info
Fan Speed
Runtime
Service
RDM UID, MAC, NET
Quick-Light
DMX Values
Error Info
Main Menu
DMX Tables
Control
Settings
Info
Service
Quick-Light

No Lock Automatically deactivates the lock
60 seconds Automatically locks the push-button rotary encoder after 60 sec. of inactivity
Lock: Press and hold the encoder for approx. 5 seconds

.
Displays the firmware of the device components
Displays the temperature of the LED unit (LED), the device head (Head), and the device base (Base) in
degrees Celsius and Fahrenheit
Displays the speed of the two fans in the device head in RPM
Display of the total runtime (total), the runtime after the last service (service), and the runtime of the LED
unit (LED)
Displays RDM UID, the MAC address, and the network address
Displays the DMX values available
Displays status of the device components (OK/Error)
Tables of different DMX modes
Settings
Display
Signal Fail
Dimmer
Color Calibration
Pan/Tilt Motors
Fan Settings
Auto Lock
Default
Info
Firmware
Temperature
Fan Speed
Runtime
RDM UID, MAC, NET
DMX Values
Error Info
DMX Tables
Info
Service
Reset
Test
Password
Quick-Light
Pan
Tilt
Dimmer
Hue
Saturation
Color Temperature
Zoom
21