Herunterladen Inhalt Inhalt Diese Seite drucken

W-Dmx; W-Dmx™ Status; Control Menu (Control) - Cameo EVOS W3 Bedienungsanleitung

Led wash-beam moving head with single pixel control
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28

W-DMX™

To pair the W-DMX receiver with the W-DMX-compatible transmitter, execute the Reset command in the receiver menu (select Reset and
confirm). The receiver is now ready to pair and waits for a transmitter to request pairing. Start pairing by selecting Link in the transmitter
menu and then confirm your selection. Pairing will then be carried out automatically. These same steps can be used to pair several receivers
030°C
to a transmitter at the same time or in succession (e.g., for master/slave operation). In general, a W-DMX connection will remain connected
until it is severed by selecting Reset in the receiver menu or Unlink in the transmitter menu, regardless of whether a device is temporarily
disconnected from the power supply.
001
W-DMX™ STATUS
43CH
W-DMX
W-DMX
W-DMX ac-
deactivates
activated as
receiver, not
paired
030°C
off or out of
Mode: Art-Net
(sACN)
Universe:

CONTROL MENU (Control)

IP:
192.168.000.150
The control menu allows different operating modes and their setting options to be selected in the corresponding submenus. The DMX ad-
dress, DMX operating mode, universe, IP address, and subnet mask can be set across modes in every operating mode, if they are relevant.
DMX Address:
DMX OPERATION VIA XLR CABLE
Starting from the main display, press the push-button rotary encoder to navigate to the main menu. Rotate the encoder to select the control
menu Control and then press the encoder. Rotate the encoder to select the DMX menu item and confirm by pressing the encoder. The table
below provides information on the submenu items in the DMX menu and the corresponding setting options.
Main Menu
Control
Settings
Info
Service
Quick-Light
Control
Rotate the encoder to select, press the encoder to confirm, rotate to change value or status, press to confirm. Return with
DMX
W-DMX
Art-Net
Address
Sets the DMX start address
sACN
Channel Mode
Selects the DMX mode
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Control
8
DMX
W-DMX
Art-Net
!
W-DMX ac-
W-DMX
tivated and
tivated and
activated
paired as
paired as a
and paired
a receiver,
receiver, no
as a receiv-
transmitter
DMX signal
er, DMX
switched
signal is
present
range
43CH
0
001
!
030°C
Mode
Slave
(Scene x)
W-DMX
W-DMX activated
activated as
as transmitter
transmitter
with G4s stan-
with G3
dard, DMX signal
standard,
is present
030°C
DMX signal is
present
Mode:
Art-Net (sACN)+DMX
Universe:
IP:
192.168.000.150
Main Address:
Pixel Address:
Control
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Control
DMX
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Control
DMX
W-DMX
Art-Net
!
W-DMX
W-DMX activated
activated as
as a transmitter
transmitter with
with G4s standard,
G3 standard, no
no DMX signal
DMX signal
030°C
Mode:
0
Main Address:
001
001
!
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
.
DMX
W-DMX
Art-Net
001–xxx
sACN
Art-Net+DMX
16CH / 18CH / 23CH /
33CH / 39CH / 43CH
sACN+DMX
Kling-Net+DMX
Slave
Scenes
DMX
W-DMX
Art-Net
Klin
Co
Co
Co

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clew3

Inhaltsverzeichnis