Device Info (Info); System Info; Setup And Installation - Cameo OPUS S5 CLOS5 Bedienungsanleitung

DEVICE INFO (Info)

Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Info menu and press ENTER.
This will take you to the submenu to view the device information (select via UP and DOWN, confirm with ENTER).

System Info

Error infor- Functional error display
mation If it is not possible to eliminate a functional error by resetting or restarting, the faulty unit must be repaired by an
authorized service center.
Temperature Temperature display
Runtime Displays operating hours
Firmware Displays the firmware of
components 1U to 8U

SETUP AND INSTALLATION

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on a flat and solid surface. Install on truss using two
omega brackets that are attached to the bottom side of the unit (A). Two omega brackets are included in delivery, suitable truss clamps are
optionally available. Make sure that the spotlight is firmly attached and secure it using a suitable safety cable on the designated location (B).
Important info: Overhead installation requires extensive experience, which includes calculating the limit values of the work-
ing load of the installation material to be used and regular safety inspections of all installation material and spotlights. If you
do not have these qualifications, do not attempt to carry out the installation yourself; contact a professional company.
Head xx°C/F°
Base xx°C/F°
Unit Displays the temperature in Celsius or Fahrenheit
Total Time Displays the total operating time in hours
Current Time Displays the current operating time
Time PW Inputs the password to reset the current operating time
(Time PW = 050)
Clean Current Resets the current operating time
Vx.x.x
B
A
A
13