Quick Light; Setup And Installation - Cameo EVOS W3 Bedienungsanleitung

Settings
Info

QUICK LIGHT

Service
Use the Quick Light function to quickly and easily set a static scene. Starting from the main display, press the push-button rotary encoder
Quick-Light
to navigate to the main menu. Rotate the encoder to select the quick light menu Quick Light and then press the encoder. The Quick Light
table below provides information on the submenu items in the Quick Light menu.
Main Menu
Control
Settings
Info
Service
Quick-Light
Rotate the encoder to select, press to confirm, return with

Pan
Tilt
Dimmer
Hue
Saturation
Color Temperature
Zoom

SETUP AND INSTALLATION

The integrated rubber feet allow the spotlight to be placed in a suitable position on a level surface. Install on a crossbeam using two omega
brackets that are attached to the base of the device
clamps are available as needed. Make sure that the spotlight is firmly attached, and secure it to one of the designated locations
suitable safety cable.
Important safety information: Overhead installation requires extensive experience, including the calculation of the load limit
values of the installation material and regular safety inspection of all installation materials and spotlights. If you do not have
these qualifications, do not attempt to carry out the installation yourself; contact a professional company.
24
Quick Light

.
Panning setting
Tilting setting
Master dimmer
Hue
Saturation
Color temperature
Zoom setting
. Two omega brackets are included in the scope of delivery; suitable crossbeam
A
B
Test
Password
Quick-Light
Pan
Tilt
Dimmer
Hue
Saturation
Color Temperature
Zoom
A
000–255
000–255
000–255
000–255
000–255
000–255
000–255
with a
B
A