Cameo EVOS W3 Bedienungsanleitung Seite 12

Send to DMX The sACN control signal can
be transmitted in the defined
universe to DMX OUT (sACN
to DMX), to W-DMX (sACN to
W-DMX), or to both (sACN to
DMX and W-DMX). The function
is deactivated with "Disable".
The sACN control signal can
be transmitted to any universe
from 000 to 254 (Select
Universe) to DMX OUT (sACN
to DMX), to W-DMX (sACN to
W-DMX), or to both (sACN to
DMX and W-DMX).
OPERATION VIA ART-NET AND DMX
The Art-Net+DMX operating mode makes it possible to separately control the LEDs and move the heads with Art-Net and DMX. This lets
you select whether the LEDs are controlled with Art-Net and the heads moved with DMX, or vice versa. When selecting this operating mode,
there are two channel modes to select from for the control functions. Only the motion functions are available in 11-channel mode and the
pixels are only controlled with the second input signal. Illumination functions are also available in 18-channel mode.
Starting from the main display, press the push-button rotary encoder to navigate to the main menu. Rotate the encoder to select the control
menu Control and then press the encoder. Rotate the encoder to select the Art-Net+DMX menu item and confirm by pressing the encoder.
The table below provides information on the submenu items in the Art-Net+DMX menu and the corresponding setting options.
12

Disable
Current Universe 
(alternative to "User
sACN to DMX
Universe")
sACN to DMX and
W-DMX
sACN to W-DMX
User Universe 
(alternative to "Cur-
Select Universe
rent Universe")
Sending Options

Send Mode 
G3
G4s
Connect 
Link
Unlink

Send Mode 
G3
G4s
Connect

Link
Unlink
000–254

sACN to DMX
sACN to DMX 
and W-DMX
Send Mode 
Connect 
sACN to 
W-DMX
Send Mode 
Connect 
G3
G4s
Link
Unlink
G3
G4s
Link
Unlink