Cameo EVOS W3 Bedienungsanleitung Seite 20

Dimmer Selects dimmer
curve, dimming
behavior, and
PWM frequency
Color Color calibration
Calibration
Pan/Tilt Configures the
Motors device head
Fan Set- Fan control
tings
20

Curve 
Linear
Exponential
Logarithmic
S-curve
Response

LED Response
Halogen Response
PWM 
800 Hz, 1200 Hz, 2000 Hz,
3600 Hz, 12 kHz, 25 kHz

User Calibration 
Red Balance 125–255
Green Balance 125–255
Blue Balance 125–255
White Balance 125–255
Raw R, G, B, and W with
maximum brightness
Factory Cali- Factory preset calibration
bration of R, G, B, and W

Pan/Tilt Speed 000–255
Pan Reverse 
Normal
Reversed
Tilt Reverse 
Normal
Reversed
Sensors 
ON
OFF
Move In Black 
OFF
ON

Automatic
The fan speed will adjust automatically to the temperature of the device head
Normal Reduced maximum fan speed, resulting in a slightly reduced brightness, as
necessary
Silent Consistently low fan speed with reduced brightness, as necessary
Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower
DMX values and broadly adjusted at higher DMX
values
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
Light intensity can be finely adjusted at lower
and higher DMX values, and broadly adjusted at
medium DMX values
The spotlight responds abruptly to changes in
the DMX value
The spotlight behaves like a halogen spotlight
with soft changes in brightness
User-defined calibration of R, G, B, and W
The Raw mode is always active in pixel control
Pan movement direction does not reverse
Pan movement direction reverses
Tilt movement direction does not reverse
Tilt movement direction reverses
Automatic position correction activated
Automatic position correction deactivated
No blackout when head moves
Blackout when head moves