Disposal; Troubleshooting - CMi C-G-2800 C Originalbetriebsanleitung

106554_Generator_Benzin.book Seite 50 Montag, 21. November 2016 4:30 16
GB
– Replace the spark plug again (Cleaning/replac-
ing spark plugs – Page 49).
Transportation
– Allow the device to cool down.
– Empty the tank.
– Transport the device horizontally.
– Secure the device from shifting and tipping.

Disposal

Disposing of the device
WARNING! Danger of fire! Avoid dam-
ages caused by escaping fuel. Empty the
tank before disposal.
Devices with this symbol may not be dis-
posed of with the household waste. You
are obliged to dispose of such devices
separately.
Contact your community authorities for
information regarding the correct disposal of the
device.
By disposing of the unit correctly you are ensuring
that it will be recycled or processed for reuse. This
helps to prevent hazardous materials from damaging
the environment.
Error/Fault
The motor does not start.
The motor does not start.
Motor is operating too fast.
50
Disposing of the packaging
The packaging is made of cardboard and separately
labelled foil which is also recyclable.
– Take these materials to a recycling centre.

Troubleshooting

What to do when something doesn't work...
In many cases, small defects can lead to a malfunc-
tion. You will usually be able to deal with these your-
self. Please consult the following table before con-
tacting the seller. This may save you a lot of effort
and quite often money.
Cause
Tank empty?
Ignition switch at STOP?
Spark plug connector not fitted
firmly?
Is the spark plug connector dirty?
Excess fuel in the combustion
chamber?
Spark plug is dirty (tip is sooty)?
Electrode spacing of the spark
plug is too big?
Wrong fuel?
Is the spark plug defective?
Motor oil level too low?
Motor is too cold?
DANGER! Risk to life! Unprofessional
repairs may mean that your device will no
longer operate safely. This endangers you
and your environment.
Remedies
Filling with fuel – Page 45
Set the ignition switch to ON.
Affix the connector firmly to the
spark plug.
Clean the spark plug.
Shift the cold start lever to the
right, and start motor repeatedly.
If the motor does not start:
Remove the spark plug and dry
the electrode.
Clean the spark plug.
Set the correct electrode distance
(Technical data – Page 51).
Empty the tank and fill with the
right mixture.
Replace the spark plug.
Filling with motor oil – Page 46
Allow motor to warm up slowly, if
necessary shift the cold start le-
ver.