CMi C-G-2800 C Originalbetriebsanleitung Seite 48

106554_Generator_Benzin.book Seite 48 Montag, 21. November 2016 4:30 16
GB
WARNING! Risk of injury! Carry out only
the maintenance work described here in
person. All other work, in particular motor
maintenance and repairs, must be carried
out by a specialist. Improper maintenance
work can damage the device and lead to
injuries.
Cleaning and maintenance overview
If necessary
What? How?
Clean the device. Cleaning the device –
Page 48
Once after 20 operating hours
What? How?
Change the motor oil. Draining the motor oil
– Page 46
Filling with motor oil –
Page 46
Every 50 hours of operation, or every 3 months
(more frequently when operated in dusty environ-
ments)
What? How?
Clean/replace air filter. Cleaning/replacing
the air filter – Page 48
Clean/replace spark Cleaning/replacing
plugs. spark plugs –
Page 49.
Every 100 operating hours or every six months
What? How?
Clean fuel filter. Clean the fuel filter –
Page 49
Check and set the play Have implemented by
of the valve. authorised specialist
workshop!
Every 300 hours of operation, or every 12 months
What? How?
Clean fuel filter. Clean the fuel filter –
Page 49
Check the fuel line Have implemented by
authorised specialist
workshop!
48
Cleaning the device
CAUTION! Device damage! No water
may be allowed to enter the device.
CAUTION! Device damage! Never use
cleaning fluids or solvents for cleaning.
This may irreversibly damage the device.
The plastic parts may be attacked by the
chemicals.
– Wipe down the device with a damp cloth.
Cleaning/replacing the air filter
CAUTION! Device damage! The device
should never be operated without an air
filter, as this may cause damage to the
motor. If the air filter is damaged or heavily
soiled, it must be replaced. Only a foam fil-
ter element soaked with oil will filter out
the pollutants in the foam plastic. A foam
filter can only filter out the larger pollut-
ants. Lightly soak a new foam filter ele-
ment in oil before use.
Figure 8 – Page 4
– Remove the lid from the air filter housing (9).
– Remove the foam filter element.
– Remove coarse dirt from the foam filter element.
– Used compressed air to carefully blow out dirt.
Replace the air filter
CAUTION! Device damage! Pay atten-
tion to ensure that the vacuum protection
is always mounted behind the air filter and
is positioned correctly.
– Insert the cleaned/new foam filter element.
– Replace the lid of the air filter housing (9).
Checking the level of motor oil
CAUTION! Device damage! Each time,
before starting the motor, check the level
of the motor oil and, if necessary, top up
with motor oil. Operating the motor with
insufficient oil will damage the motor.
Direct oil and oil designed for two-stroke
motors will shorten the lifetime of the
motor. The motor oil must be changed
after the first twenty operating hours. Use
the prescribed motor oil (Fuel and lubri-
cants to be used – Page 52).