Connecting Control Cords; About Sr; Enjoying Through Memory Cards (Home Gallery Function); Readable Memory Cards - Pioneer PDP-436XDE Bedienungsanleitung

Enjoying through External Equipment
13

Connecting control cords

Connect control cords between the Media Receiver and other
PIONEER equipment having the t logo. You can then operate
the connected equipment by sending commands from its
remote control unit to the remote control sensor on the Plasma
Display.
After the CONTROL IN terminals have been connected, the
remote control sensors on the connected equipment do not
accept commands from the remote control units. Face the
remote control units to the remote control sensor on the
Plasma Display when operating the connected equipment.
NOTE
• Make sure that the power is turned off when making
connections.
• Complete all component connections before making control
cord connections.

About SR+

The CONTROL OUT terminal on the rear of the Media Receiver
supports SR+ that allows linked operations with a PIONEER AV
receiver. SR+ presents functions such as the input switch
linkage operation function and the DSP surround mode display
function. For more information, see the instruction manual
that came with the PIONEER AV receiver supporting SR+.
NOTE
• While in connection through SR+, the volume on this system
is temporarily minimised.
Media Receiver (rear view)
I N OUT
SERVICE ONLY
CONTROL
INPUT 1
ANT
i /o link.A
SELECT
INPUT
2 3
INPUT 1
I N O U T
CONTROL
The control cables (commercially
available) are monaural cables
with mini plugs (no resistance).
66
En
OUT IN
OPTICAL
DIGITAL OUT COMMON INTERFACE
ANT(DIGITAL)
INPUT 2
Y P P R-AUDIO-L SUB
B R
WOOFER
COMPONENT VIDEO AUDIO OUTPUT
INPUT 3
HDMI HDMI BLACK WHITE
INPUT 4
SYSTEM CABLE
CONTROL
IN
OUT
CONTROL
IN
OUT
CONTROL
IN
OUT
Enjoying through memory cards (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still
camera.
Digital still
camera
Memory card with
PC CARD adapter

Readable memory cards

This system can read memory cards that conform to the
PCMCIA Type II and whose formats are the FAT12, FAT16,
FAT32, or VFAT.

Readable data files

This system can read only JPEG files that meet the following
conditions:
• Extensions are JPG or JPEG.
• JPEG 4:2:2 and 4:2:0 format
• The image resolution must be less than 2400 pixels in the
horizontal direction and 1800 pixels in the vertical direction.
• The image resolution must be higher than 160 pixels in the
horizontal direction and 120 pixels in the vertical direction.
NOTE
AC IN
• This system may not be able to display images, depending on
the type of your PC CARD adapter or memory card.
• This system may not be able to display images modified or
edited using a personal computer or other equipment.
Image data display
ON STANDBY TIMER
PULL
OPEN
STANDBY/ON