Front Surround; Listening To Audio From The Sub Screen Using Headphones - Pioneer PDP-436XDE Bedienungsanleitung

Basic Adjustment Settings
Item Description
Off Deactivates the FOCUS.
(factory default)
On Activates the FOCUS.
5
Press HOME MENU to exit the menu.
NOTE
• The effect of this function differs depending on signals.
• You cannot set up the sound field for listening with phones.
• If you set up the sound field with phones connected, the new
setting will become effective for sound from the speakers
after the phones are disconnected.

Front Surround

This provides three-dimensional sound effects and/or deep,
rich bass.
1
Press HOME MENU.
2
then ENTER).
Select "Sound" ( /
3
Select "Front Surround" ( / ).
4
Select the desired parameter ( / ).
Item Description
Off
Deactivates both the SRS and TruBass.
SRS
Reproduces highly effective three-dimensional
sound.
TruBass
Provides deep, rich bass using a new
(factory default) technology.
TruBass + SRS
Provides both TruBass and SRS effects.
5
Press HOME MENU to exit the menu.
NOTE
• (WOW) designates a status where the FOCUS is on
and TruBass + SRS has been selected for Front Surround.
• is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The effect of this function differs depending on signals.
• You cannot set up the sound field for listening with phones.
• If you set up the sound field with phones connected, the new
setting will become effective for sound from the speakers
after the phones are disconnected.
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-picture
mode; audio coming from the main screen is output from the
speakers. To use this function, follow the procedure below.
1
Press HOME MENU.
2
then ENTER).
Select "Sound" ( /
3
Select "Headphone Output" ( / ).
4
Select the desired parameter ( / ).
Front Surround
Headphone Output
Sub Volume
Item Description
Main Audio coming from the main screen is output
from the PHONES output terminal.
Sub When in the 2-screen or picture-in-picture mode,
audio coming from the sub screen is output
from the PHONES output terminal.
5
Select "Sub Volume" ( / ).
6
Select the desired volume level ( / ).
Front Surround
Headphone Output
Sub Volume
7
Press HOME MENU to exit the menu.
NOTE
• To adjust the volume for headphones after selecting "Sub",
always use the menu item (shown in the procedure) no
matter whether the screen is in the single, 2-screen, or
picture-in-picture mode. When the screen is in the single
mode with "Sub" selected, audio coming from the screen is
output from speakers even with headphones connected.
• Audio from a connected subwoofer is muted when you have
selected "Sub" for "Headphone Output" and connected
headphones.
Off
Main
15
Off
Sub
15
08
37
En