Cleaning And Maintenance; Environmental Protection - Concept ZN 8001 Bedienungsanleitung

CLEANING AND MAINTENANCE

- Disconnect the iron from the socket.
- Shorts of fabrics can stick on the ironing surface of the iron. Remove them with a
piece of coarse cloth soaked in mixture of vinegar and water. Then dry the plate with
dry cloth.
- Do not use abrasives or steel wool for cleaning the ironing plate. Keep the ironing
plate smooth, prevent from contacting with hard metallic objects. Take care for
scraping or surface damages of the ironing face.
- Iron outer jacket clean with a piece of
clean damp cloth, polish it with dry cloth.
- Never use abrasives, or concentrated
detergents, the ironing surface could be
damaged. Never dip the iron, even its
part in water or other liquids.
- Never pour vinegar or any other scale
remover into water reservoir. For cleaning
steam openings use simply a piece of soft
cloth and remove lumps from internal
parts of openings.
SERVICE
Get repaired faults, requiring handling internal parts of the product, or large-scale
maintenance, in a service centre.

ENVIRONMENTAL PROTECTION

- Prefer recycling of packaging and scrap.
- Transporting box can be put into sorted waste.
- Plastic polyethylene bags (PE) deliver to salvage for recycling.
Appliance recycling after service life expiration:
This symbol on the product or on packaging indicates that this product
should not be put into domestic waste. It should be handed over to the
junk for electric and electronic equipment recycling. Proper disposal will
prevent negative impact to environment and human health that would be
caused by improper disposal of this product. For detailed information on recycling
ask competent local administration, domestic waste service, of the shop where the
product has been purchased.
ZN 8001, ZN 8002
UK
25