System Settings; Calling The System Settings; Playlist [Selecting A Criterion For Database Search]; Sleep Time [Sleep Mode] - Omnitronic CMP-2001 Bedienungsanleitung

10

SYSTEM SETTINGS

This menu allows you to change important system settings for the player.

Calling the System Settings

1
Keep the button TIME pressed for 3 seconds
to call the system settings.
• The display indicates the first menu item
"Playlist".
2
Turn the TRACK [
browse the menu items.
3
Press the control to select the desired menu
item and change adjustments.
4
Turn the TRACK [
change adjustments and then press the
control to confirm.
5
To exit the system settings and save your
settings temporarily, shortly press the button
TIME.
• If no adjustment is made for 20 seconds
while in menu mode, the setting procedure
will be cancelled and you will exit the menu
automatically.
Playlist [Selecting a criterion for
database search]
Here you can select the criterion when searching
for music in the database of a USB storage
device: [Normal, Title, Artist, Album, Genre].
• Normal: In the basic setting Normal the titles are
indicated according to the established data
structure.
• Title: When you search by title name, all titles in
the database created with the Database Builder
will be displayed in alphabetical order.
• Artist: When you search by artist name, all
artists will be displayed in alphabetical order.
You can narrow down the amount of results by
first selecting the artist you wish to browse, and
then you can select the title you want to play.
• Album: Using the search by Album option will
allow you to search by the name of the album
that a title is from. Once you select an album, all
of the titles found under that album will be
displayed.
• Genre: When search by Genre is chosen, you
will be presented with a list of all of the genres
found in the database. Because not every MP3
file has ID3 genre tagging, some titles may not
be displayed in this search. Once you select a
genre from the list, you will be able to browse all
songs within that genre.
] press control to
] press control to

Sleep Time [Sleep mode]

The player will automatically step into sleep mode
if no button is actuated in pause or cue mode for a
defined period of time. The display inserts
"SLEEP". This extends the life of your motor drive
and laser. Press the button CUE or [►II], to exit
sleep mode. You can select 5 to 120 minutes. In
the basic setting [No Sleep] the player is always
switched on.

Line Setup [Display mode text line]

Here you can select the display mode of the text
line. There are three different modes available:
[MODE 1-3]. Additionally, you can use the jogdial
to adjust the start/stop time [DIS=0.5~12.0 sec]
and the move time [RUN=50~2000 msec].

Bit rate [Show/hide bit rate]

In the basic setting [Display ON], the bit rate of the
title selected is shown in the text line as second
information of the ID3 tag. If the setting [Display
OFF] is selected, the bit rate is not shown.

REC. USB [Recording medium]

Here you can select the USB port for recordings:
[USB1] for USB port 1 at the front panel (basic
setting) or [USB2] for USB port 2 at the rear
panel.

REC. Bitrate [Recording bitrate]

The bitrate (data volume per second) for
recordings can be adjusted between 32 Kbps and
320 Kbps. The larger the value, the higher the
sound quality.

Version [View information]

Here you can view information in the display
about the product: [CON:XX] is for control version,
[SER:XX] is for servo version and [DSP:XX] is for
DSP version.
41