Basic Settings; Selecting The Operating Mode; Switching Over The Time Indication; Selecting A Title - Omnitronic XDP-1400 Bedienungsanleitung

6.6 Basic settings

After switching on, continuous play and elapsed title time (indication "ELAPSED") will be active as basic
settings. These settings can be changed.

6.6.1 Selecting the operating mode

In the basic setting continuous play, all titles of are played one after the other and the unit stops at the end of
the last title. Press the button SINGLE on the player or the button SGL/CTN on the remote control to switch
to single title play. Then the unit is set to pause at the start of the next title after playing a title and indicates
"SINGLE".

6.6.2 Switching over the time indication

1 As a basic setting, the display will show the elapsed time of the current title (indication "ELAPSED"):
• numerically in minutes, seconds and frames (1 frame = 1/75 second)
• graphically by the length of the bargraph. The longer the replay time, the more segments the bargraph
will have. The last 12 seconds of a title are indicated by the bargraph flashing in its full length.
2 Press the button TIME to switch over the time indication to remaining title time (indication "REMAIN").
The number of segments of the bargraph will be reduced with increased playing time.
3 To return to basic setting, press the button TIME once again.

6.7 Selecting a title

1 For selecting titles use the control FOLDER/TRACK SEARCH. Turn the control once to the left to select
the next lower title or to the right to select the next higher title. Title number and title name are indicated
in the text line.
2 With the buttons
time the button is pressed, the unit will advance one title. By pressing the button
the beginning of the title and with each further actuation, the unit will go back another title.
3 By pressing the button +10, the unit will advance 10 titles.
4 For direct selection of a title with the numerical keys 0-9 on the remote control, enter its number. When
entering a one-digit number, press 0 first. Examples: For title number 1 press key 0 and 1. For title
number 27 press key 2 and 7.

6.7.1 Selecting a folder

1 To select folders, the folder selection mode must be activated first. For this purpose, shortly press the
control FOLDER/TRACK SEARCH. The display indicates "FOLDER".
2 Now turn the control FOLDER/TRACK SEARCH to browse the folders. The folders names are indicated
in the text line. To select the desired folder press the control FOLDER/TRACK SEARCH. Afterwards, the
unit switches back to the title selection mode. The indication "FOLDER" will be extinguished.
If the control FOLDER/TRACK SEARCH is not turned for 3 seconds in folder selection mode, the unit will
automatically switch back to the title selection mode.

6.8 Starting playback/pause

1 Press the button
The starting point of the title will automatically be stored in the memory as the cue point. The unit will
return to this cue point by shortly pressing the button CUE.
2 Playback can be interrupted at any time with the button
flashing. To continue, press the button
interrupts the playing and returns the title to the cue point.
and you can skip one title or several titles in forward or backward direction. Each
, to start playback (the display indicates . During playback, the blue LED lights.
)
(the display indicates
once again. Pressing the button CUE during playback also
29/32
, the unit will go to
. The blue LED starts
)
00047148.DOC, Version 1.0