Installing The Cp 1401 Software Under Ms-Dos; Software Requirements - Siemens CP 1401 Installationsanleitung

S79220-A0707-A-02-7419
6 Installing the CP 1401 Software under
MS-DOS
6.1

Software Requirements

Operating System
Installation
Diskettes
Space Required on
the Hard Disk
Operation with PC
Networks
The CP 1401 communications processor can be operated
under MS DOS, Version 6.0 and higher.
The program is supplied on 3.5" diskettes.
The first diskette contains programs for installation
under MS DOS and is read only.
The second diskette for MS DOS contains specific files
for the program and the software required to support PC
networks and is also read only.
The third diskette contains an NDIS 3.0 driver for
installation under Windows 95.
Approximately 1 Mbyte is required on the hard disk.
If you want to communicate via PC networks using the
CP 1401, make sure that your system meets the
requirements for communication via PC networks as
described in Section 7 before you install the software.
63
SIMATIC NET CP 1401
© Copyright by SIEMENS AG