Installation; First Steps - Siemens CP 1401 Installationsanleitung

SIMATIC NET CP 1401
6.2

Installation

6.2.1

First Steps

Preparations for
Software
Installation
© Copyright by SIEMENS AG
Make the following preparations for the software installation:
Read the README.TXT file on the first diskette of the
package.
Read these installation instructions carefully.
Make a backup copy of the two diskettes before you start
the installation.
The software must only be installed on an M7 computer that
was booted with MS DOS.
The installation must not be installed on an M7
computer that was booted with M7RMOS32-
DOS/Windows.
From now on, only use your backup copy of the
package and not the original diskettes.
64
S79220-A0707-A-02-7419