Automatic Programmes - Electrolux EOC69900 Benutzerinformation

12 electrolux
Symbol
Setting the clock functions
1. Go to Functions menu and set a heating
function and a temperature.
2. Go to Timers menu and set the clock
function.
3. Touch
time. Touch OK .
When the clock function ends, an acous-
tic signal sounds. The appliance deacti-
vates. The colours on display change
and clock function symbol flashes.
4. Touch a sensor field to stop the signals.
When you use Food probe, the func-
tions Duration and End Time do not op-
erate.
You can set the Reminder function
when the appliance is on or off. To set
the Reminder function when the appli-
ance is off, touch
necessary time. Touch OK .
The Reminder function stays on also
when you deactivate the appliance.
Set and Go
Set the heating function and the tempera-
ture. In the Timers menu set the Set and Go
function and touch OK . The appliance is in
the standby mode. Touch any sensor field
to start the set heating function.
Heat and hold
You can activate or deactivate the func-
tion in Settings menu.

AUTOMATIC PROGRAMMES

The automatic programmes give optimum
settings for each type of meat or other rec-
ipes. Refer to the recipe book.
• Meat programmes with Weight Automat-
ic ( Recipes menu)
Downloaded from www.Manualslib.com
Function
To set when the appliance activates.
Start time
To set when the appliance deactivates.
End time
To set the settings for the heating function and activate it later.
Set and Go
To set a count up. It shows how long the appliance operates.
Runtime
This function has no effect on the operation of the appliance.
To set a countdown. This function has no effect on the opera-
Reminder
tion of the appliance.
or to set the necessary
or to set the
manuals search engine
Description
The Heat and hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
• The set temperature is more than
80°C.
• The Duration function is set.
When the function ends, an acoustic signal
sounds.
The Heat and hold function operates for 30
minutes.
The Heat and hold function stays on if you
change the heating functions.
Time Extension
You can activate or deactivate the func-
tion in Settings menu.
The Time Extension function makes the heat-
ing function continue after the set time ends.
• Applicable for all heating functions with
function Duration or Weight Automatic .
• Not applicable for heating functions with
food probe.
• Meat programmes with Food probe Auto-
matic ( Recipes menu)
• Recipe Automatic ( Recipes menu)