Clock Functions; Automatic Programmes - Electrolux EOC69900 Benutzerinformation

12 electrolux

CLOCK FUNCTIONS

Symbol Function
Duration
Start time
End time
Set+Go
Count up timer
Reminder
Setting the clock functions
1. Go to Functions menu and set a heat-
ing function and a temperature.
2. Go to Timers menu and set the clock
function.
3. Touch
or
time. Touch OK.
When the clock function ends, an
acoustic signal sounds. The appliance
deactivates. The colours on display
change and clock function symbol
flashes.
4. Touch a sensor field to stop the sig-
nals.
When you use Food probe, the func-
tions Duration and End Time do not
operate.
You can set the Reminder function
when the appliance is on or off. To set
the Reminder function when the appli-
ance is off, touch
necessary time. Touch OK.
The Reminder function stays on also
when you deactivate the appliance.
SET+GO
Set the heating function and the tempera-
ture. In the Timers menu set the Set+Go
function and touch OK. The appliance is in
the standby mode. Touch any sensor field
to start the set heating function.

AUTOMATIC PROGRAMMES

The automatic programmes give optimum
settings for each type of meat or other rec-
ipes.
• Meat programmes with Weight Automat-
ic ( Recipes menu)
To set a count down.
To set when the appliance activates.
To set when the appliance deactivates.
To set the settings for the heating function and activate it later.
To set a count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
To set a countdown. This function has no effect on the opera-
tion of the appliance.
to set the necessary
or to set the
Description
HEAT AND HOLD
You can activate or deactivate the
function in Settings menu.
The Heat and hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
• The set temperature is more than
80°C.
• The Duration function is set.
When the function ends, an acoustic signal
sounds.
The Heat and hold function operates for 30
minutes.
The Heat and hold function stays on if you
change the heating functions.
TIME EXTENSION
You can activate or deactivate the
function in Settings menu.
The Time Extension function makes the
heating function continue after the set time
ends.
• Applicable for all heating functions with
function Duration or Weight Automatic .
• Not applicable for heating functions with
food probe.
• Meat programmes with Food probe Au-
tomatic ( Recipes menu)
• Recipe Automatic ( Recipes menu)