Electrolux EOC69900 Benutzerinformation Seite 19

10. Carefully lift (step 1) and remove (step
2) the panels of glass one by one. Start
from the top panel of glass.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels
1 2
( ), (
sequence (refer to the illustration).
Downloaded from www.Manualslib.com
90°
2
1
3
) and ( ) back in the correct
manuals search engine
1 2 3
2
The middle panels (
tive frame. When you install them, make
sure that the screen-printing zone looks to
the inner side of the door. Make sure that af-
ter the installation the surface of the glass
2 3
panel frame ( - ) on the screen-print-
ing zones is not rough when you touch it.
Make sure that you install the panels of
glass in the seats correctly (refer to the illus-
tration).
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
electrolux 19
3
- ) have a decora-