Automatic Programmes; Using The Accessories - Electrolux EOC69900 Benutzerinformation

AUTOMATIC PROGRAMMES

The automatic programmes give optimum
settings for each type of meat or other rec-
ipes. Refer to the recipe book.
• Meat programmes with Weight Automat-
ic ( Recipes menu)
• Meat programmes with Food probe Au-
tomatic ( Recipes menu)
• Recipe Automatic ( Recipes menu)
Recipes with Weight Automatic
This function automatically calculates the
roasting time. To use the function, it is nec-
essary to input the food weight.
Activating the function:
1. Activate the appliance.
2. Set the menu Recipes . Touch OK.
3. Set the category and dish. Touch OK.
4. Set the Weight Automatic . Touch OK.
5. Touch
or
Touch OK.
The automatic program starts. When time
ends, an acoustic signal sounds. Touch a
sensor field to deactivate the signal.
Recipes with Recipe Automatic
This appliance has a set of recipes you can
use. Recipes are fixed and you cannot
change them.
Activating the function:
1. Activate the appliance.
2. Set the menu Recipes . Touch OK.
3. Set the category and dish. Touch OK.
4. Set the Recipe Automatic . Touch OK.
Recipes with Food Probe Automatic
1. Activate the appliance.
2. Set the menu Recipes . Touch OK.
3. Set the category and dish. Touch OK.
4. Set the Food Probe Automatic .
5. Touch OK.
6. Install the food probe.
When the programme ends, an acoustic
signal sounds.
Use a sensor field to deactivate the
acoustic signal.

USING THE ACCESSORIES

Warning! Refer to "Safety information"
chapter.
to set the food weight.
7. Remove the food probe.
When you set the option Manual, the
display shows automatic settings but
you can change them.
My programmes menu
You can store your favourite settings: dura-
tion, temperature or heating function.
Storing a programme
1. Activate the appliance.
2. Set a heating function, temperature and
time or an automatic program from Rec-
ipes . Touch OK.
3. Set the menu My programmes .
4. Touch
or
new . Touch OK. The display shows a
possible name for the programme.
5. Touch
or
ber. Touch OK.
6. To remove the last symbol, touch
to set the option Remove . Touch
OK.
7. Do step 5 again and again to set the
name of the programme.
8. Touch
or
Touch OK.
If the memory is full, erase some entries
from the menu.
To change the name of a programme,
use the option Rename . Refer to
"Storing a programme".
Activating the programme
1. Activate the appliance.
2. Set the menu My programmes . Touch
OK.
3. Set the name of the programme. Touch
OK.
4. Set the option Start . Touch OK.
Food probe
The food probe measures the core temper-
ature of the food. When the food is at the
electrolux 13
to set the option Add
to set the letter or num-
to set the option Save .
or