BestWater 66-11 Gebrauchsanweisung Seite 78

Software updates – Jungbrunnen 66-10 / 66-11
system asks you whether you want to
import the restoration of the memory
card. Confirm this again please with
OK-key.
the
Digital X-Pro 20b Controller
SaVE
SaVE & loCK KEYPad
rEStorE
A B
Now the software Update is being
launched, please
Digital X-Pro 20b Controller
restore program
from memory card
Press oK
A B
During the Update, the system must
not be switched off. Press no keys on
the control unit during the Update!
the electricity supply is interrupted
during the update, the system can
get damaged.
8. After the successful update, please
press the
Digital X-Pro 20b Controller
restoring program
complete
Press oK
A B
78
Downloaded from www.Manualslib.com
MEMORY
ESC - +
wait.
MEMORY
ESC - +
OK-key
as requested.
MEMORY
ESC - +
manuals search engine
9. In the last step, you need only still
start the new program. For this pur-
pose, select RUN from the menu and
press the
Digital X-Pro 20b Controller
ruN
ParamEtEr
mISCEllaNEouS
mEmorY Card
OK
A
Digital X-Pro 20b Controller
ruN program
rESEt latChEd
ValuES & ruN
CaNClE
A
OK
Acknowledge the start „RUN Program"
with the OK-key. After the activation,
please press the
If can remove the MEMORY module and
seal the interface with the
10. Switch off the system and then ON
again. Start running it as
OK
OK-key.
B ESC - +
B ESC - +
ESC-key.
Now you
cover.
usual.
MEMORY
OK
MEMORY
OK