BestWater 66-11 Gebrauchsanweisung Seite 62

Operation of the system
Through selection of the operating
mode "permeate production" and
acknowledging with the OK-key, the
system is activated again.
If the device was deactivated for lon-
ger than 15 minutes, the next water
withdrawal begins with a Flushing
program.
As soon as this is finished, the system
starts the standard operations
Reading out system data
To be able to display the system data,
the operating hours display must be
called up with the
The display shows the
Digital X-Pro 20b Controller
oPEratINg hourS:
SElECt dISPlaY
wIth "+" or "-"
a < -
A B
By actuating the (+) or (–)-key, you
receive the following data:
•
Filter change at the latest
• Operating hours to filter Change...
• Operating hours of the prefilters...
•
Operating hours pump
•
Operating hours permeate produc-
tion...
• Resets after the filter Change...
62
Downloaded from www.Manualslib.com
again.
B-key.
Message:
ESC - +
OK
on...
runtime...
manuals search engine
– Jungbrunnen 66-10 / 66-11
When you press the (+)-key, the in-
formation appears as to when the filter
change must be carried out. Here, the
time can be read out as
The display could look like
Digital X-Pro 20b Controller
Filter change at the
latest on:
day00015mon00005
a < -
year 00014
A B ESC
In this case, the filter change must be
done at the latest on 15.05.2014.
When the (+)-key is pressed again,
the information appears as to after
how many operating hours the filter
change must be carried
The display could look like
Digital X-Pro 20b Controller
operating hours to
f ilter Change:
00000hrs 00015min
a < -
A B ESC
When the (+)-key is pressed again,
the operating hours of the prefilters
are indicated to
The display could look like
date.
this:
- +
OK
out.
this:
- +
OK
you.
this: