Maintenance of the BestWater system
After you have established all connec-
tions, connect these with both bulk-
head connectors.
Now you can close the casing again.
Make sure that the two lugs are in-
serted on the inside of the cover into
the slot provided. Only then can the
cover engage.
Now you can screw the cover together
again. Proceed in the reverse order as
when dismantling.
While tightening the screws, please
use no force.
74
Downloaded from
www.Manualslib.com
manuals search engine
Now you can connect the system again
with the extraction points, the water
supply and the drain.
Reconnect the power supply and
switch on the system.