Operation Modes - BestWater 66-11 Gebrauchsanweisung

Operation of the system
Digital X-Pro 20b Controller
operating hours of
the pref ilters:
00000hrs 00000min
a < -
A B
When the (+)-key is pressed again,
the pump runtime of the system ap-
pears.
The display could look like
Beim nochmaligen Drücken der Taste
Digital X-Pro 20b Controller
(+) erscheint die Angabe, wann der
operating hours
Filterwechsel durchgeführt werden
pump runtime:
muss. Hier kann der Zeitpunkt als Da-
00006days0232hrs
tum abgelesen werden.
00053min
a < -
Die Anzeige könnte so aussehen:
A B
If you press the (+)-key once more,
you will see the overall permeate pro-
duction of the
The display could look like
Digital X-Pro 20b Controller
operating hours
permeate production:
00004days 00003hrs
a < -
A B
When the (+)-key is pressed again
the Resets appear after the filter
Change.
Downloaded from www.Manualslib.com
ESC - +
this:
ESC - +
system.
this:
00041min
ESC - +
manuals search engine
– Jungbrunnen 66-10 / 66-11
The display could look like
Digital X-Pro 20b Controller
resets after the
f ilter Change:
a <-
OK
A
To leave the operating hour menu,
please press the key
The following message is displayed on
the display:
Digital X-Pro 20b Controller
oPEratINg modE:
SElECt dISPlaY
wIth "+" or "-"
OK
A

Operation modes

If you press the (+)-key you can
select the individual operating modes
and acknowledge your selection with
the OK-key.
If you press the (+)-key once in the
operating mode menu, "permeate pro-
duction"
OK
Digital X-Pro 20b Controller
ESC < -
A
this:
00003
B ESC - +
(A).
B ESC - +
appears.
Permeate
production
- > oK
B ESC - +
OK
OK
OK
63