The Reservoir - Only For Jungbrunnen 66 - BestWater 66-11 Gebrauchsanweisung

Installation and connection
Installation – ports
The Reservoir – only for
Jungbrunnen 66-11
Before you begin with the installation,
determine the location of the reservoir.
The container should have a fixed loca-
tion and sufficient space.
The flawless functionality is only guar-
anteed if the container is installed up-
right (under the sink). Pay attention to
it that the stopcock should be observ-
able and easy to operate in installed
state.
The water inflow to the reservoir
is open if the stopcock lever is aligned
in parallel with the hoses.
For the installation of the reservoir pro-
ceed as follows:
Wrap a few layers of Teflon ribbon
around the thread in the reservoir (if
not present).
fasten the stopcock to the reservoir.
Put the plastic hoses in the stopcock
up to the limit stop (approx. 1.7 cm).
Please use the provided connection
adaptor for the operation of a washing
machine and/or dishwasher.
The maximum length of pipe with
1/4" hoses amounts to 5 m.
The maximum length of pipe with
3/8" hoses amounts to 5 m.
56
Downloaded from www.Manualslib.com manuals search engine
Installation – washing
machine and/or dishwasher
The connection adaptor included in the
standard scope of supply (only Jungb-
runnen 66-11) offers the connection of
a washing machine and/or dishwasher.
The operation of several water
consumers requires other adaptors
as well as several reservoir tanks
and/or a bigger reservoir tank.
3/8" reducing
adapter
3/4" AG srew-in
connector
Do not use force while tightening!
On the hoses to the reservoir tank
or the consumer, no additional
fittings (pressure reducer, check
valves and the like) may be in-
stalled!
1/4" hose of the
BestWater system
Reduction connector
RVS 143801
Stopcock 3/8"
for reservoir
plug connector
SVT 383801
3/8" hose