Changing the radio channel display
on the temperature station
If the temperature station is receiving the out-
door sensor radio signal, it will automatically
display the corresponding channel .
However, you can also manually set the dis-
play of various radio channels .
♦
Press the
switch between the displays CH1 (display
channel 1), CH2 (display channel 2), CH3
(display channel 3) and
channels alternately in a loop) .
NOTE
►
Only the values from outdoor sensors
which are connected to the temperature
station will be displayed .
►
If you are using several outdoor sensors
you should select a different radio chan-
nel for each outdoor sensor .
AFT 77 A1
button 0 repeatedly to
GB │ CY
(display all
│
23
■