Auriol AFT 77 A1 Bedienungsanleitung Seite 16

In addition, the reception symbol
nently displayed on the time panel 1 .
If the appliance is unable to synchronise with
the DCF signal, you can also set the time
manually (see section Basic settings) or you
can attempt the reception again .
♦ Press and hold the
3 seconds to attempt the reception search
again . The reception symbol
the time panel 1 .
The DCF signal
The DCF signal (time signal transmitter) consists
of time impulses which are transmitted by the
most accurate clock in the world – near Frank-
furt am Main, Germany .
Under ideal conditions, the radio temperature
station can receive the signals up to a distance
of around 2000 km from Frankfurt am Main .
Reception of these DCF signals normally takes
between 3 and 5 minutes . If reception of the
DCF signal fails, the temperature station will
stop trying to establish reception after around
7 minutes .
Reception can be considerably restricted by
obstacles (e .g . concrete walls) or interference
sources (e .g . other electronic appliances) .
If necessary, you should change the location
of the temperature station (e .g . put it by a
window) if reception problems continue .
│ GB │ CY
■ 12
is perma-
button 9 for about
flashes on
AFT 77 A1