Inhaltsverzeichnis
Werbung
Montageanleitung Hubdreh-Motoren
6.4.3
Umkehren des Koordinatensystems
Starting with LinMot-Talk version 6.8 the direction of the coordinate system can be selected.
Default value for rotary motors: Positive counting direction = counterclockwise (see figure chapter 6.2.1)
Default value for linear motors: Positive direction of movement = Regular (see figure in chapter 6.2.2)
If the coordinate system is reversed, this has an influence on the current and the
force/torque of the motor. In case of any uncertainties, the LinMot support should definitely
be contacted.
Abbildung: Auswahl der positiven Bewegungsrichtung (Linearmotor)
Seite 18 / 48
Abbildung: Auswahl der positiven Zählrichtung (Drehmotor)
PR01-52
DE
NTI AG / LinMot
Werbung
Inhaltsverzeichnis
