System Description - 3M 6000 serie Handbuch

GZX
3M™ 6000 Series Full Face Mask
USER INSTRUCTIONS
Please read these instructions in conjunction with
the appropriate 3M™ Filter Leaflet or 3M™ Air
Supply Unit User Instructions and with the 3M™
Facepiece Reference Leaflet where you will find
information on:
• Approved combinations of 3M™ Powered Air
Turbos and / or 3M™ Filters
• Accessories
• Spare parts
See all instructions for use and save for continuing
reference.

SYSTEM DESCRIPTION

These products meet the requirements of EN
136:1998, full face masks and should be used in
combination with a pair of approved 3M filters (see
Reference Leaflet) to form a filtering apparatus for
respiratory protection. Such an apparatus is
designed to remove potentially harmful gases,
vapours and / or particulates from the surrounding
atmosphere. This apparatus may also be used as a
system with the 3M Air Supply Units (see Reference
Leaflet).
^ WARNINGS AND LIMITATIONS
Particular attention should be given to warning
statements where indicated.
^ WARNING
Always be sure that the complete product is:
- Suitable for the application;
- Fitted correctly;
- Worn during all periods of exposure;
- Replaced when necessary.
Proper selection, training, use and appropriate
maintenance are essential in order for the
product to help protect the wearer from certain
airborne contaminants. Failure to follow all
instructions on the use of these respiratory
protection products and/or failure to properly
wear the complete product during all periods of
exposure may adversely affect the wearer's
health, lead to severe or life threatening illness
or permanent disability.
• For suitability and proper use follow local
regulations and refer to all information supplied. For
more information contact a safety professional or
3M on 0870 60 800 60 (UK) or 1800 320 500
(Ireland).
• Do not use in concentrations above those
specified in the Technical Specification.
• Do not use for respiratory protection against
atmospheric contaminants/concentrations which
have poor warning properties or are unknown or
immediately dangerous to life and health (IDLH) or
against contaminants/concentrations which
generate high heats of reaction with chemical filters.
• Do not use in atmospheres containing less than
19.5% oxygen. (3M definition. Individual countries
may apply their own limits on oxygen deficiency.
Seek advice if in doubt).
• Do not use these products in oxygen or
oxygen-enriched atmospheres.
• Only use with the Filters/Air Supply Units and
Spares/Accessories listed in the Reference Leaflet
and within the usage conditions given in the
Technical Specification.
• Only for use by trained, competent personnel.
• Leave the contaminated area immediately if:
a) Any part of the system becomes damaged.
b) Airflow to the facepiece decreases or stops.
c) Breathing becomes difficult or increased
breathing resistance occurs.
d) Dizziness or other distress occurs.
e) You smell or taste contaminants or irritation
occurs.
• Never modify or alter this product. Replace parts
only with original 3M spare parts.
• In case of intended use in explosive atmospheres,
contact 3M Technical Service.
• Do not use these products with self-contained
breathing apparatus.
• Do not use for escape purposes.
• Do not use with beards or other facial hair that
may inhibit contact between the face and the
product thus preventing a good seal.
• Only use with the spectacle kit available as an
accessory with this product, and ensure spectacle
arms do not interfere with the faceseal.
• National regulations may impose specific
limitations on the use of filters depending on the
filter class and the facepiece used. Use of any 3M™
Facepiece / Filter combination should be in
accordance with applicable Health and Safety
standards, Respiratory Selection Tables or in
accordance with the recommendations of an
Occupational Hygienist.
• Filters need to be regularly changed. The
5
fre
the
• F
He
(Ire
• If
• A
fac
flo
an
• If
• T
• T
• T
EN
If d
va
inv
• T
be
• T
N
R
Ma
we
rea
Th
fro
PR
Ins
an
Ch
co
pa
be
Ins
Th
rec
1.
ce
is n
stif
2.
Lif
3.
go
4.
fat