SOLIS 5515 Bedienungsanleitung Seite 132

•
Pour 400 ml of cold water into the glass jug and switch the appliance on. Bring
the water to the boil with the quick start function BOILING.
Take the water jug off the base, carefully open the lid (Caution, hot steam!)
and pour 800 ml SOLIPOL
tion reaches the MAX marking. Please ensure that the glass jug is placed on a
non-sensitive resp. shielded worktop.
• Let the descaling solution sit for approx. 30 minutes. Do not boil!
• Slowly pour the descaling solution out through the spout to descale that area as
well. Remove possibly remaining limestone deposits on the spout with a towel
soaked in a solution of SOLIPOL
•
After you have poured the descaling solution away, you have to fill the jug three
times with fresh, cold tap water up to the MAX marking, bring it to the boil with
the quick start function BOILING and pour the water away each time to remove
all residues of the descaling solution. Let the appliance cool down between two
boiling processes!
s STORAGE
•
When not needed, the Tea Kettle should be disconnected from the power, be
allowed to cool down completely and then dried.
•
Wind the power cord around the cord wrap in the bottom of the appliance base.
•
Place the dry lids and the dry tea strainer on resp. in the dry jug.
•
Store the cool, clean and dry appliance in an upright position, best in the original
packaging. Do not place any objects on the appliance.
132
forte into the water jug so that the descaling solu-
®
forte and water.
®