SOLIS 5515 Bedienungsanleitung Seite 119

•
Let the appliance cool down and refill it with cold tap water. To do that, just
removing the lid insert is enough.
•
Repeat the boiling process another time, pour that water away as well.
•
Now your appliance is ready for use.
s STARTING UP
Please note:
•
The surfaces marked with the
process and stay hot for some time after. This concerns the glass jug, the lid with
the grey lid insert, the tea strainer and of course the water / the tea in the jug.
Be especially careful when opening the lid insert to mount the tea strainer, use
cooking gloves or a kitchen towel.
•
Do not overfill the glass jug! Please note the MAX marking, otherwise the boiling
water might splash out.
•
Keep in mind that the appliance base, the power cord and the power plug as
well as the outsides and the bottom of the glass jug must never become wet.
STE P 1:
n
FILLIN G T H E GL A S S J U G WIT H C OL D T A P WA T E R
•
Remove both lids or just the lid insert from the jug and fill the jug with cold tap
water (not ice water), at least up to the MIN marking. Do not exceed the MAX
marking.
•
The tea strainer is not yet placed in the jug.
•
Close the jug with the lid. The lid ring has to line up with the edge of the jug all
around, the line on the lid insert must first be in the "OPEN" position, then in
the "CLOSE" position.
•
If necessary, dry the outside of the glass jug as well as the jug bottom. Place the
jug on the dry appliance base.
WARNING: Hazar
•
symbol become very hot during the boiling
119