Turning On The Power - Yamaha MusicCast WX-010 Bedienungsanleitung

■ To mount the unit to a wall mount hanger
The unit can be mounted to the wall using a commerciallyavailable wall mount hanger. Use the wall mount hanger hole on the
rear panel to mount.
y
Use a wall mount hanger that is compatible for a unified coarse screw, such as those used for the tripod stand of a camera.
Rear panel
60 mm (2-3/8")
58mm
(2-1/4")
WX-010
1.7 kg
(3.7 lbs.) 120 mm (4-3/4")
Note
• If using a wall mount hanger, use the one compatible for this unit.
• Use the wall mount hanger whose withstand load capacity is over 4.5 kg (10 lbs.).
• Follow the instructions in the owner's manual of the wall mount hanger and mount the unit correctly.
• If you mount the unit incorrectly or use a wall mount hanger that is not compatible for the unit, the unit may fall and cause
injury.
• Check the safety after mounting the unit. Yamaha is not responsible for any accidents which may be caused due to an
incorrect installation position or incorrect installation methods, or for any malfunction of the wall mount hanger. If you are
worried about the safety, ask a professional to install.
Rear pannel
Power cable
Top pannel
Tap (power)/CONNECT.
WX-010
Minimum
5 mm (1/4")

TURNING ON THE POWER

A
Note
• After the power plug is inserted into the wall outlet, it
y Auto Standby
If about 20 minutes have elapsed with no playback and no
operation while the unit is on, it will automatically enter
standby.
You can change the auto standby function setting in the
MusicCast CONTROLLER app (☞ P.7). Tap
Power indicator
(Settings) in the room select display, and then change the
setting.
5
Specification of mounting screw:
UNC 1/4-20
Diameter
Screw thread
Specifications of the screw hole
Diameter
Depth
Plug the power cable into the wall outlet and
tap (power)/CONNECT.
The unit turns on and the power indicator lights. If you
tap again, the unit turns off (standby) and the power
indicator turns off.
takes about 10 seconds for the touch sensors to be
adjusted. In order to prevent malfunction of the touch
sensors, do not touch them (
/ / ) or play back for about 10 seconds.
TURNING ON THE POWER
6.35 mm (1/4")
20 (per 1")
6.35 mm (1/4")
9 mm (3/8")
(power)/CONNECT/