Changing The Timer Start Setting - OHAUS Guardian 7000 Serie Installations-, Betriebs- Und Wartungsanweisungen

EN-38
8. Briefly press the left knob (C) to return to the top
level of the settings menu.
9. Rotate the left knob (C) to scroll to the 'EXIT' icon.
10. Briefly press the left knob (C) to return to the main
operating screen.
Note: There is not an icon on the display to
indicate that the beeper has been disabled.

2.16 Changing the Timer Start Setting

The Timer Start Setting controls the initiation of the timer in countdown situations. In standard mode (STD) the
timer will start as soon as the heater or the stirrer turns on. In temperature dependent mode (TEMP) the timer will
start once the heater temperature or probe temperature (if the external probe is connected) reaches the set
temperature. In temperature dependent mode, the timer will not start in stirring only activities. By default, the unit is
set to standard mode.
1. To control the Timer Start setting, the unit must
first be in the top level of the settings menu.
2. Rotate the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
4. Rotate the left knob (C) to the "TMDE" (Timer
Dependent) setting.
5. Briefly press the left knob (C) again to change the
Timer Start settings.
The current Timer Start setting will begin to blink.
6. Rotate the left knob (C) to scroll to the desired
Timer Start setting.
Guardian 7000 Series