Changing The Power Recovery Setting - OHAUS Guardian 7000 Serie Installations-, Betriebs- Und Wartungsanweisungen

Guardian 7000 Series
7. Briefly press the left knob (C) to confirm the Timer
Start setting.
8. Rotate the left knob (C) to the "BACK" icon.
9. Briefly press the left knob (C) to return to the top
level of the settings menu.
10. Rotate the left knob (C) to scroll to 'EXIT'.
11. Briefly press the left knob (C) to return to the main
operating screen.
a) The temperature dependent icon will only be
illuminated when using the timer in
countdown mode.
b) Once the heater is turned on, the
temperature dependent icon will blink. Then,
once the heater reaches the set temperature,
the temperature dependent icon will stop
blinking, and the timer will begin to
countdown.

2.17 Changing the Power Recovery Setting

Power Recovery is an optional feature that allows the unit to automatically restart heater and stirrer functions when
power is returned to the unit after a disconnect. By default, this feature is turned off.
1. To control the Power Recovery feature, the unit
must first be in the top level of the settings menu.
2. Use the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
EN-39