Reset To Factory Default Settings - OHAUS Guardian 7000 Serie Installations-, Betriebs- Und Wartungsanweisungen

Guardian 7000 Series

2.18 Reset to Factory Default Settings

Resetting the unit to Factory Default Settings will do the following:
•
Clear all programs and single point calibration (SPC) temperatures.
•
Return SmartHeat™ to the unit's maximum allowable temperature.
•
Turn off SmartPresence™, SmartLink™, SmartRate™, Power Recovery, and the temperature dependent
timer.
•
Re-enable the beeper setting.
1. To reset the unit to factory default settings, the unit
must first be in the top level of the settings menu.
2. Rotate the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
4. Rotate the left knob (C) to the "RSET" (Reset)
setting.
5. Briefly press the left knob (C) to change the Reset
settings.
The current Reset setting will begin to blink.
6. Rotate the left knob (C) to scroll to the desired
Reset setting.
7. Press and hold the left knob (C) until the unit
beeps to confirm the Reset setting.
8. Rotate the left knob (C) to the "BACK" icon.
EN-41