Using The Smartpresence™ Feature - OHAUS Guardian 7000 Serie Installations-, Betriebs- Und Wartungsanweisungen

EN-26
2.12 Using the SmartPresence™ Feature
SmartPresence™ is an optional safety feature designed to automatically turn the heater off if the unit is unattended
for a user-selected time limit.
1. Underneath the unit there is a sensor that can
detect the presence of a user in front of the unit.
Be sure to keep the area in front of the sensor
clear for the SmartPresence™ feature to work
optimally.
2. To control the SmartPresence™ feature, the unit
must first be in the top level of the settings menu.
3. Rotate the left knob (C) to scroll to the 'SAFE'
setting.
4. Briefly press the left knob (C) to enter the 'SAFE'
settings menu.
'INIT' may appear on the screen for several
seconds while the sensor initializes. Then it will
display the current 'USER' detection setting.
NOTE: If the SmartPresence™ is enabled when the unit is unplugged, it will remain enabled when power is
restored to the unit. The heater will not be able to turn on until the sensor finishes initializing. To indicate that
the sensor has not finished initializing, the SmartPresence™ icon will blink when the left knob (C) is pressed
to turn on the heater.
5. Once the 'OFF' or 'ON' appears on the screen,
briefly press the left knob (C) to change the
SmartPresence™ setting.
The setting will begin to blink to indicate that it can
be modified.
6. Rotate the left knob (C) to switch between "OFF"
and "ON".
7. Briefly press the left knob (C) to confirm the
desired setting.
8. Rotate the left knob (C) to the "TOUT" (Time Out)
setting.
The time out setting can only be set in HH:MM
mode.
Guardian 7000 Series