Changing The Power Recovery Setting - OHAUS Guardian 5000 Serie Installations-, Betriebs- Und Wartungsanweisungen

EN-28
9. Rotate the left knob (C) to scroll to the 'EXIT' icon.
10. Briefly press the left knob (C) to return to the main
operating screen.
Note: There is not an icon to indicate that the
beeper has been disabled.

2.9 Changing the Power Recovery Setting

Power Recovery is an optional feature that allows the unit to automatically restart heater and stirrer functions when
power is returned to the unit after a disconnect. By default, this feature is turned off.
1. To control the Power Recovery Feature, the unit
must first be in the top level of the settings menu.
2. Use the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
4. Rotate the left knob (C) to the "PWRR" (Power
Recovery) setting.
5. Briefly press the left knob (C) to change the Power
Recovery settings.
The current Power Recovery setting will begin to
blink.
6. Rotate the left knob (C) to scroll to the desired
Power Recovery setting.
'OFF' – heating and stirring functions will need to
be manually restarted after power restoration.
'ON' – heating and stirring functions will
automatically restart upon power restoration.
7. Briefly press the left knob (C) to confirm the Power
Recovery setting.
Guardian 5000 Series