Changing Settings; Calibration - OHAUS Adventurer Analytical AX224N Handbuch

EN-28
All menu navigation is performed by touching the display. To enter the Menu, touch Menu from any Application
Home screen. The Main menu appears, with buttons for Back and Exit. Continue touching the appropriate list
item to navigate to the Menu items.
5.1.1

Changing Settings

To change a menu setting, navigate to that setting using the following steps:
Enter the Menu
From any Application screen, Touch Menu.
The Main Menu List appears on the display.
Select the Sub-Menu
Find the item of the Main Menu List and touch it.
The Sub-Menu appears.
Select the Menu Item
Continue until the desired setting is chosen in the
Menu list. Touch the setting to change it.
The changed setting will be displayed as
highlighted yellow for about 1 second to confirm
the changed value.
Exit the Menu and Return to the Current Application
After the setting is confirmed, touch Exit to return to the Application.
Note: at any time the Back & Exit buttons can be touched to navigate to the desired area of the menu or return to
the current Application. Continue until the desired setting is chose in the menu list.
The Adventurer balance Main menu structure is illustrated below.
Communication

Calibration

Balance Setup
GLP and GMP
Weighing
Units
Factory
Data Reset
ADVENTURER BALANCES
Data
Maintenance
Lockout