Using The Smartheat™ Feature - OHAUS Guardian 7000 Serie Installations-, Betriebs- Und Wartungsanweisungen

EN-20
2.8 Using the SmartHeat™ Feature
SmartHeat™ allows the user to change the maximum
temperature limit (TLIM) of the heater.
1. To control the SmartHeat™ Feature, the unit must
first be in the top level of the Settings menu.
2. Rotate the left knob (C) to scroll to the "TLIM"
feature.
3. Briefly press the left knob (C) to change the
temperature limit of the heater.
The temperature will begin to blink to indicate that
it can be modified.
4. Rotate the left knob (C) to the desired temperature
limit of the heater.
5. Briefly press the left knob (C) to confirm the
setting.
The temperature will stop blinking.
6. To exit the settings menu, rotate the left knob (C)
to scroll to 'EXIT'.
7. Briefly press the left knob (C) to return to the main
operating screen.
8. The SmartHeat™ icon (AA) will be illuminated to
indicate that there is a temperature limit that is less
than the default setting.
The heat setting (O) will not be able to be set
above the set temperature limit.
Note: While using the external probe, SmartHeat™
will still limit the temperature of the heater. This
may cause the sample to heat at a slower rate and
peak at a lower temperature than the SmartHeat™
setting.
Guardian 7000 Series