Disposal; Notes On The Ec Declaration Of Conformity - Parkside PDSLG 20 A1 Originalbetriebsanleitung

Disposal

The packaging protects the appliance
from damage during transport . The
packaging materials have been selected
for their environmental friendliness and
disposal attributes, and are therefore recyclable .
Returning the packaging to the material cycle
conserves raw materials and reduces the amount
of waste that is generated . Dispose of packaging
materials that are no longer needed in accordance
with applicable local regulations .
Do not dispose of power tools
in your normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools be
collected separately and recycled in an environ-
mentally compatible manner .
Do not dispose of batteries in
your normal household waste!
Defective or worn-out rechargeable
batteries must be recycled according
to Directive 2006/66/EC .
Take the battery pack and/or tool to a nearby
collection facility .
Please consult your local authorities regarding
suitable disposal of worn-out power tools/battery
packs .
PDSLG 20 A1
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The packag-
ing material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
Notes on the EC declaration
of conformity
This appliance complies with the basic requirements
and other relevant provisions of the Electromagnetic
Compatibility Directive 2014/30/EU and the
Low-Voltage Directive 2014/35/EU .
The complete original Declaration of Conformity
is available from the importer .
RoHS Directive
(2011/65/EU)*
* The manufacturer bears the full responsibility for
compliance with this conformity declaration . The object
of the declaration described above complies with the
requirements of the Directive 2011/65/EU of the
European Parliament and Council of 8 June 2011 on
the limitations of use of certain dangerous substances
in electrical and electronic appliances .
GB │ IE │ 15 ■