Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PASSWORD CHANGE...
• Select "PASSWORD CHANGE..." using the Rotary Wheel and press
ENTER to display the current Password on the screen as shown
below. The first digit of the number will be selected. (Factory default is
123456.)
[SYSTEM SETTING]
ALARM...
RECORD...
HIDDEN CAMERA..
SEQUENCE
SYSTEM ID
PASSWORD CHECK
PASSWORD CHANGE..
LANGUAGE
• Select the first digit of the Password using the Rotary Wheel and press
ENTER to select the second digit. Repeat the same until the six digits
of the Password have been entered. Press ENTER to complete the
change.
- You can use "0" to "9" for the Password.
LANGUAGE
• Select the desired language for the use in the Menu. ENGLISH,
ESPAÑOL, FRANÇAIS, ITALIANO, DEUTSCH, NEDERLANDS
and PORTUGUÊS are available.
5. EVENT LIST
You can check the ALARM/MOTION/LOSS EVENT LIST.
Select "5. EVENT LIST" from the SETUP MENU using the Rotary
Wheel and press ENTER to display the following screen.
[ EVENT LIST]
YY/MM/DD HH:MM:SS
1 . 04/01/30
2 . 04/01/29
3 . 04/01/28
4 . 04/01/27
5 . 04/01/26
6 . 04/01/25
7 . 04/01/24
8 . 04/01/23
9 . 04/01/22
10. 04/01/21
• The latest information on Alarms, Loss and Motion Detects will be
stored. This system stores up to 50 events (10 x 5 pages) staring
from the latest one. You can check the other pages of the List by
using the Rotary Wheel.
• Press the MENU button to return to the SETUP MENU.
6. DOOR BELL LIST
To check the EVENT LIST of the DOOR BELL(S).
Select "6. DOOR BELL LIST" from the SETUP MENU using the
Rotary Wheel and press ENTER to display the following screen.
[ DOOR BELL LIST]
YY/MM/DD HH:MM:SS
1 . 04/01/30
2 . 04/01/29
3 . 04/01/28
4 . 04/01/27
5 . 04/01/26
6 . 04/01/25
7 . 04/01/24
8 . 04/01/23
02 [SEC]
1..
OFF
123456
ENGLISH..
1/5
CH
12:30:01
M
01
12:30:01
A
02
12:30:01
M
08
12:30:01
A
04
12:30:01
A
03
12:30:01
L
01
12:30:01
A
06
12:30:01
M
07
12:30:01
A
01
12:30:01
A
01
CH
12:30:01
D
01
12:30:01
D
02
12:30:01
D
08
12:30:01
D
04
12:30:01
D
03
12:30:01
D
01
12:30:01
D
06
12:30:01
D
07
• The latest information from the Door Bell detector will be stored.
This system stores up to 8 events starting from the latest one. Scroll
down the List using the Rotary Wheel and press ENTER to display
the still screen of the corresponding Door Bell. Press ENTER to
return to the DOOR BELL LIST.
• Press the MENU button to return to the SETUP MENU.
Chapter 6: Recording
1. Recording in Time Lapse (or Normal) Mode
• Image signals transmitted from up to 8 cameras play at 1/25 or 1/50
second intervals in PAL SYSTEM areas, and at 1/30 or 1/60 second
intervals in NTSC SYSTEM areas, and are recorded in the VCR.
• The TRIGGER OUT port of the VCR must be connected to the
TRIGGER (6PIN VCR Accessory) port of this system.
• When trigger signals from the VCR stop for more than 30 sec, the
Self Trigger mode is turned on to continue recording without the
trigger from the VCR.
2. Alarm/Motion Channel Intensive-Recording
• This system double-records channels in case of an Alarm/Motion.
• It records the Alarm/Motion channels in between recording the out-
put channels.
• The "VIDEO LOSS" channel is also subject to the Alarm/Motion
Channel Double-Recording.
• Ex.) The ALARM is turned on at CH2.
Then MOTION occurs at CH5.
CH2: Alarm Occurs
Chapter 7: Alarm, Motion, Loss
1. Alarm Occurrence
The Alarm becomes available only when an Alarm Box is connected.
1) When an Alarm trigger is received, a warning buzzer sounds and
the screen is divided into 9 Live-Mode sub-screens. The word
"EVENT" appears on the screen and the Alarm occurrence infor-
mation is displayed at the right bottom of the screen.
04/01/01
CH1
CH4
CH7
Eng-14
CH2: Alarm Off
CH5: Motion Occurs
and Door Bell
12:30:30
EVENT
CH2
CH3
CH5
CH6
CH8
A12345678
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
