Fixing The Fire Into The Mantelpiece; Position Of The Fire/Mantelpiece Combination, Clearance Round The Appliance - Dru Saba Sl Installationsvorschrift Und Gebrauchsanweisung

It is important to take into account any other
appliances/equipment connected to the same group
to avoid exceeding the maximum consumption for
that group.
Connect the heating set to the appliance with the 8-wire
cable and then connect the fire/mantelpiece combination
by plugging the mains lead supplied into the mains input
socket. See also: Positioning the appliance, clearance
around the appliance.

Fixing the fire into the mantelpiece

The fire has four adjustable feet. Once these have been
correctly adjusted it will be reasonably stable.
To ensure the fire does not move during cleaning, it should
be fixed in place on both sides with brackets
(preassembled in the mantelpiece) (see fig. D)
Figure D
Positioning the appliance, clearance round the
appliance
The appliance is designed to be built into the matching
mantelpiece.The space behind and around the appliance is
defined by the mantelpiece.
The build-in height of the appliance in the mantelpiece will
depend on the height of the feet. Adjust the feet so that
only the glass of the appliance is visible from the front.
Remove the cover from the lid of the appliance (see fig.
E)
Now fit the appliance into the mantelpiece working from
the back (see fig .C) and secure with the brackets (see
fig. D).
38c-1193
35
INSTRUCTIONS FOR INSTALLATION
Connect the wide, 8-pin plug extending from the
mantelpiece to the 8-pin connector on the lid of the fire
(figs. F and G) (this will connect the switch and the
heating set in the mantelpiece to the fire).
There is only one way to connect the 8-pin plug (see
photo), press the plug firmly until the locks at the sides
click (see fig. H)
Figure E
Figure F
Figure G
Figure H
Saba SL