Foreword; Introduction; Packaging; Unpacking - Dru SABA SL Installationsvorschrift Und Gebrauchsanweisung

INSTRUCTIONS FOR INSTALLATION

Foreword

Dear Customer,
Thank you for buying this DRU product. Our products are
developed and manufactured to meet the highest quality,
performance and safety requirements.You may
consequently be assured of years of trouble-free use.
The fire/mantelpiece combination is available in two
models: with logs (see photo 1) and with pebbles (see
photo 2) (see Arranging the pebbles).
The flame effect of this decorative fire can be used with or
without the heater.
The heater, which is integrated in the mantelpiece, can be
used on two settings, 650 Watt or 1300 Watt.
You can enjoy the relaxing and realistic flame effect
generated by state-of-the-art technology at any time of the
day.The energy consumption for the flames is
exceptionally low (approximately 12 Watt).
This DRU appliance is designed as a set in
combination with the corresponding mantelpiece.
The fire cannot be used separately as both the
switch and the heating element are fitted
externally in the mantelpiece.
The mantelpiece has an air inlet at the front, at the bottom
of the top piece, and a hot-air outlet at the top of the
front (see fig. A).
This booklet includes instructions for the installation and
use of your new fire/mantelpiece combination.
Please read the instructions and user manual carefully to
familiarise yourself with the use of the fire/mantelpiece
combination.
Contact your supplier if you require any further support.
This appliance/mantelpiece combination complies with
current CE directives.

Introduction

In this manual you will find information about the appliance
and matching mantelpiece, maintenance, environmental
aspects and safety precautions.
Read the manual carefully before installing the
fire/mantelpiece combination and keep it in a safe place for
future reference.

Packaging

The mantelpiece and appliance may only be transported in
the appropriate packaging. Failure to use the intended
packaging can cause transport damage which can in turn
lead to dangerous situations.

Unpacking

Once everything has been unpacked, the packaging
materials should be disposed of in an appropriate manner.
Keep the packaging until the fire/mantelpiece combination
has been installed and tests have revealed it to be in good
working order.

Receipt

Upon receipt, check that the packaging is undamaged. If
this is not the case, contact your supplier immediately.
Never use the product if the packaging is damaged.
Installation
Always have the fire/mantelpiece combination fitted by a
qualified professional in accordance with the current
regulations.

Connection

The appliance (and therefore also the heating set
integrated into the mantelpiece) should be connected to
an earthed wall socket.
The measured capacity of this appliance (with both heating
elements on) was more than 1300 Watt. It therefore has 2
x 8 Ampere slow fuses fitted in the mains input (see fig.
C)
34
Figure. C