Operating Your Engine - Yamaha EH64 Bedienungsanleitung

5. OPERATING YOUR ENGINE

TIP
Following operating method is for the
STD type acceleration lever.
As to the fixed type acceleration lever
(exp. Generator spec.), do not move it
otherwise the generator component
such as rectifier regulator may be
damaged.
STARTING
FUEL VALVE
1
(Provided by the equipment
manufacturer)
Open the fuel valve.
ACCELERATION LEVER
2
Set the acceleration lever 1/3 of
the way towards the high speed
position.
CHOKE KNOB
3
Pull the choke knob.
■ If the engine is cold or the
ambient temperature is low, pull
the choke knob fully.
■ If the engine is warm or the
ambient temperature is high,
pull the choke knob half-way, or
keep it fully open.
3
ELECTRIC STARTER
4
Turn the key switch to the "START"
position.
■ Do not operate the electric starter
continuously for more than 5 seconds,
even if the engine does not start.
■ If the engine failed to start, set the
key to the "RUN" position and wait
for about 10 seconds before retrying.
■ Never turn the key switch to the
"START" position while engine is
running.
– 9 –
CLOSE
Choke adjustment is
not necessary for the
auto-choke engine.
OFF
RUN
START