McAfee WebShield e500 Installationshandbuch Seite 75

My password does not work
If you recently restored the appliance's software without maintaining the
previous settings, the password reverts to the default password
e500changeme.
I have forgotten my password
You must use the WebShield e500 Appliance recovery CD to return the
appliance's password to its default password e500changeme; see
and upgrading the appliance's software" on page
6: Reset passwords to factory default during the restoration process.
Some of the user interface does not display properly
The appliance's user interface is optimized for Microsoft Internet Explorer
v4.0, v5.0, v5.5 or v6.0, and supports Netscape Navigator v4.7. Check the
accompanying release notes to see if there are known issues when using some
web browsers on particular operating systems.
My clients (software) cannot communicate through the appliance
Check the following:
• The required proxies are enabled for the appliance (all supported protocols
are enabled by default); see
page
• The clients and other equipment are configured to route traffic to and from
the appliance; see
• There are no network problems, and your equipment is connected
correctly.
Web browsing does not work, or URL blocking is not enforced
The appliance must have access to a DNS server to verify web browsing
(HTTP) requests and determine which URLs to block, if URL blocking is
configured. Therefore, you must configure a DNS server in the System
Configuration page; see
Installation Guide
41.
"Configuring your other equipment" on page
Step 9 on page
57. Use option
"Configuring the appliance's protocols" on
35.
Installation Guide — English
"Restoring
48.
ENG - 65